|
Structural Study By X Ray Profile Analysis And Thermodynamics Properties Of Cu Cr And Cu Mo Alloys Processed By Mechanical Alloying.
|
2010 |
2 |
resumen de reunión |
Acta Crystallographica A Foundation And Advances
|
WoS |
|
The Influence Of Mechanical Activation Process On The Microstructure And Mechanical Properties Of Bulk Ti<Sub>2</Sub>Al N Max Phase Obtained By Reactive Hot Pressing
|
2019 |
23 |
artículo de investigación |
Ceramics International
|
WoS Scopus |
|
Study Of The Adhesion Mechanism Of Acidithiobacillus Ferrooxidans To Pyrite In Fresh And Saline Water
|
2019 |
5 |
artículo de investigación |
Minerals
|
WoS Scopus |
|
Mechanically Enhanced Novel Ti Based Alloy Foams Obtained By Hot Pressing
|
2019 |
13 |
artículo de investigación |
Materials Science And Engineering: A
|
WoS Scopus |
|
Synthesis, Characterization And Mechanical Properties Of Ti Nb Ta Zr Foams For Biomedical Applications
|
2019 |
2 |
proceedings paper |
Materials Today: Proceedings
|
WoS Scopus |
|
Effects Of Post Discharge Nitriding On The Structural And Corrosion Properties Of 4140 Alloyed Steel
|
2019 |
15 |
artículo de investigación |
Surface & Coatings Technology
|
WoS Scopus |
|
Structural Study Of Novel Nanocrystalline Fcc Ti Ta Sn Alloy
|
2019 |
15 |
artículo de investigación |
Metallurgical And Materials Transactions A: Physical Metallurgy And Materials Science
|
WoS Scopus |
|
Influence Of Porosity On The Elastic Modulus Of Ti Zr Ta Nb Foams With A Low Nb Content
|
2019 |
17 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Production Of Ag Zn O Powders By Hot Mechanochemical Processing
|
2019 |
15 |
artículo de investigación |
Transactions Of Nonferrous Metals Society Of China (English Edition)
|
WoS Scopus |
|
Enhanced Mechanical And Electrical Properties Of Novel Graphene Reinforced Copper Matrix Composites
|
2019 |
89 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
A Further Study Of The Kinetics Of Recrystallization And Grain Growth Of Cold Rolled Twip Steel
|
2018 |
5 |
artículo de investigación |
Revista De Metalurgia
|
WoS Scopus |
|
Thermodynamic Analysis Of Fe Contamination In Cu Mo Alloys Processed By Mechanical Alloying
|
2018 |
3 |
artículo de investigación |
Philosophical Magazine Letters
|
WoS Scopus |
|
Linear Versus Nonlinear Acoustic Probing Of Plasticity In Metals: A Quantitative Assessment
|
2018 |
21 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Effects Of Zr On The Amorphization Of Cu Ni Zr Alloys Prepared By Mechanical Alloying
|
2018 |
12 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Evolution Of Oxide Film On The Internal Porosity Of Ti 30 Nb 13 Ta 2 Mn Alloy Foam
|
2018 |
15 |
artículo de investigación |
Electrochimica Acta
|
WoS Scopus |
|
Synthesis And Electrochemical Properties Of Ti Si Alloys Prepared By Mechanical Alloying And Heat Treatment
|
2018 |
3 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Effect Of Heat Treatments And Si C Content In The Mechanical Properties And Microstructure Of Self Lubricating Steels
|
2018 |
0 |
artículo de investigación |
Materials Research
|
WoS Scopus |
|
Influence Of The Mn Content On The Ti Nbx Mn Alloys With A Novel Fcc Structure
|
2018 |
8 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Development Of A Novel Fcc Structure For An Amorphous Nanocrystalline Ti 33 Nb 4 Mn (At.%) Ternary Alloy
|
2018 |
24 |
artículo de investigación |
Materials Characterization
|
WoS Scopus |
|
Carbon Footprint Of Sheep Production Systems In Semi Arid Zone Of Chile: A Simulation Based Approach Of Productive Scenarios And Precipitation Patterns
|
2017 |
18 |
artículo de investigación |
Agricultural Systems
|
WoS Scopus |
|
Microstructural And Mechanical Characterization Of Copper, Nickel, And Cu Based Alloys Obtained By Mechanical Alloying And Hot Pressing
|
2017 |
18 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Microstructure And Mechanical Properties Of Copper, Nickel And Ternary Alloys Cu Ni Zr Obtained By Mechanical Alloying And Hot Pressing
|
2017 |
11 |
artículo de investigación |
Mrs Advances
|
WoS Scopus |
|
Novel Route To Synthesize Metallic Alloys By Applying Low Energy Centrifugal Field
|
2017 |
3 |
artículo de investigación |
Physica Status Solidi (B): Basic Research
|
WoS Scopus |
|
In Situ Monitoring Of Dislocation Proliferation During Plastic Deformation Using Ultrasound
|
2017 |
25 |
artículo de investigación |
International Journal Of Plasticity
|
WoS Scopus |
|
Characterization Of Al Si Cu Mg Foams Manufactured In Situ
|
2017 |
8 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Study On The Microstructural Evolution Of Ti Nb Based Alloy Obtained By High Energy Ball Milling
|
2017 |
54 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Characterization Of Phase Changes During Fabrication Of Copper Alloys, Crystalline And Non Crystalline, Prepared By Mechanical Alloying
|
2016 |
5 |
artículo de investigación |
Ingenieria E Investigacion
|
WoS Scopus |
|
Use Of Incremental Levels Of Dehydrated Olive Cake In Lamb Diets As An Alternative For Grazing Systems In The Central Dryland Area In Chile: The Effect On Carcass Traits Of Suffolk Down Lambs
|
2016 |
0 |
artículo de investigación |
Ciencia E Investigación Agraria
|
WoS SciELO Scopus |
|
A Simulation Based Approach For Evaluating The Effects Of Farm Type, Management, And Rainfall On The Water Footprint Of Sheep Grazing Systems In A Semi Arid Environment
|
2016 |
9 |
artículo de investigación |
Agricultural Systems
|
WoS Scopus |
|
Fractal Analysis Of The Heat Treatment Response For Multiphase Al Alloys
|
2016 |
9 |
artículo de investigación |
Materials Research
|
WoS Scopus |
|
Synthesis And Characterization Of Mechanical Alloyed Mg Ni Ca And Mg Cu Ca Amorphous Alloys
|
2015 |
2 |
proceedings paper |
International Congress Of Science And Technology Of Metallurgy And Materials, Sam Conamet 2013
|
WoS |
|
A Novel Solid State Method For Manufacturing Al Foams By Over Solution Heat Treatment
|
2016 |
5 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Solid Solution And Amorphous Phase In Ti Nb Ta Mn Systems Synthesized By Mechanical Alloying
|
2016 |
36 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Advances On Indirect Methods To Evaluate Tool Wear For Radiata Pine Solid Wood Molding
|
2016 |
17 |
artículo de investigación |
Wear
|
WoS Scopus |
|
Changes In The Pastoral Sheep Systems Of Semi Arid Mediterranean Areas: Association With Common Agricultural Policy Reform And Implications For Sustainability
|
2015 |
14 |
artículo de investigación |
Spanish Journal Of Agricultural Research
|
WoS Scopus |
|
Synthesis And Characterization Of Ti Ta Nb Mn Foams
|
2016 |
37 |
artículo de investigación |
Materials Science And Engineering C
|
WoS Scopus |
|
Sheep Production Systems In The Semi Arid Zone: Changes And Simulated Bio Economic Performances In A Case Study In Central Chile
|
2015 |
27 |
artículo de investigación |
Livestock Science
|
WoS Scopus |
|
Production Of Copper Based Metallic Glasses: Evolution Of The Phases During Mechanical Alloying
|
2015 |
1 |
artículo de investigación |
Revista Materia
|
WoS Scopus |
|
Study Of Ni Microstructural Changes When Subjected To High Energy Milling
|
2015 |
1 |
artículo de investigación |
Revista Materia
|
WoS Scopus |
|
Dem Fea Estimation Of Pores Arrangement Effect On The Compressive Young's Modulus For Mg Foams
|
2015 |
15 |
artículo de investigación |
Computational Materials Science
|
WoS Scopus |
|
Economic Sustainability Of Organic Dairy Sheep Systems In Central Spain
|
2015 |
13 |
artículo de investigación |
Italian Journal Of Animal Science
|
WoS Scopus |
|
Simplified Fractal Fea Model For The Estimation Of The Young's Modulus Of Ti Foams Obtained By Powder Metallurgy
|
2015 |
17 |
artículo de investigación |
Materials And Design
|
WoS Scopus |
|
Fea Evaluation Of The Al4 C3 Formation Effect On The Young's Modulus Of Carbon Nanotube Reinforced Aluminum Matrix Composites
|
2015 |
53 |
artículo de investigación |
Composite Structures
|
WoS Scopus |
|
Production And Characterisation Of Mechanical Properties Of Ti Nb Ta Mn Alloys Foams For Biomedical Applications
|
2015 |
2 |
artículo de investigación |
Powder Metallurgy
|
WoS Scopus |
|
Characterization Of Cheese Consumers In Santiago Province, Chile
|
2014 |
9 |
artículo de investigación |
Ciencia E Investigación Agraria
|
WoS SciELO Scopus |
|
Synthesis Of Ag Zn O Powders By Means Of A Mechanochemical Process
|
2014 |
10 |
artículo de investigación |
Applied Physics A: Materials Science And Processing
|
WoS Scopus |
|
A Comparative Study Of The Fatty Acid Profiles In Commercial Sheep Cheeses
|
2014 |
20 |
artículo de investigación |
Grasas Y Aceites
|
WoS Scopus |
|
Improvement Of Fea Estimations For Compression Behavior Of Mg Foams Based On Experimental Observations
|
2014 |
9 |
artículo de investigación |
Computational Materials Science
|
WoS Scopus |
|
Fabrication Of Nanocrystalline Alloys Cu Cr Mo Super Satured Solid Solution By Mechanical Alloying
|
2014 |
27 |
artículo de investigación |
Materials Chemistry And Physics
|
WoS Scopus |
|
Feeding Extruded Linseed To Dairy Ewes Under Extensive Grazing Conditions
|
2014 |
2 |
artículo de investigación |
Ciencia E Investigación Agraria
|
WoS SciELO Scopus |
|
Study Of The Influence Of Cu And Ni On The Kinetics Of Strain Induced Martensite In Austempered Ductile Cast Iron Estudio De La Influencia Del Cu Y Ni En La Cinética De Transformación Martensítica Inducida Por Deformación En Fundiciones Nodulares Austemperadas
|
2013 |
0 |
artículo de investigación |
Revista De Metalurgia
|
WoS Scopus |
|
Mechanical Alloying And Subsequent Heat Treatment Of Ag Zn Powders
|
2013 |
9 |
artículo de investigación |
Transactions Of Nonferrous Metals Society Of China (English Edition)
|
WoS Scopus |
|
Feeding Olive Cake To Ewes Improves Fatty Acid Profile Of Milk And Cheese
|
2013 |
49 |
artículo de investigación |
Animal Feed Science And Technology
|
WoS Scopus |
|
Effect Of Dietary Inclusion Of Lampante Olive Oil On Milk And Cheese Fatty Acid Profiles Of Ewes
|
2013 |
10 |
artículo de investigación |
Grasas Y Aceites
|
WoS Scopus |
|
Performance Of Lambs Grazing An Annual Mediterranean Pasture Or Fed Supplements Based On Olive Oil Cake Or Maize And Its Influence On System Outputs
|
2013 |
6 |
artículo de investigación |
Animal Production Science
|
WoS Scopus |
|
Degradation Of Metal Polymer Composite Submitted To Uniaxial Deformations In 3.5% Na Cl Solution
|
2013 |
4 |
artículo de investigación |
Journal Of Adhesion Science And Technology
|
WoS Scopus |
|
Lipid And Volatile Fractions Of Hard And Semi Hard Farmhouse Sheep Milk Cheeses From Chile
|
2013 |
4 |
artículo de investigación |
Dairy Science And Technology
|
WoS Scopus |
|
A Simulation Model Of Mesophytic Perennial Grasslands
|
2012 |
2 |
artículo de investigación |
Chilean Journal Of Agricultural Research
|
WoS SciELO Scopus |
|
Structural Study Of Nanocrystalline Solid Solution Of Cu Mo Obtained By Mechanical Alloying
|
2012 |
46 |
artículo de investigación |
Materials Science And Engineering: A
|
WoS Scopus |
|
Effect Of Mechanical Activation On The Barite Carbothermic Reduction
|
2012 |
22 |
artículo de investigación |
International Journal Of Mineral Processing
|
WoS Scopus |
|
Technical Efficiency And Viability Of Organic Dairy Sheep Farming Systems In A Traditional Area For Sheep Production In Spain
|
2011 |
49 |
artículo de investigación |
Small Ruminant Research
|
WoS Scopus |
|
Simple Thermodynamic Model Of The Extension Of Solid Solution Of Cu Mo Alloys Processed By Mechanical Alloying
|
2011 |
32 |
artículo de investigación |
Materials Chemistry And Physics
|
WoS Scopus |
|
Effect Of Amorphous Mg50 Ni50 On Hydriding And Dehydriding Behavior Of Mg2 Ni Alloy
|
2011 |
13 |
artículo de investigación |
Materials Characterization
|
WoS Scopus |
|
Sulphuric Acid Leaching Of Mechanically Activated Chalcopyrite
|
2010 |
2 |
artículo de investigación |
Revista Facultad De Ingenieria
|
WoS Scopus |
|
Mechanical Alloying Of Cu X Cr (X = 3, 5 And 8 Wt.%) Alloys
|
2010 |
24 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Thermal Stability Of Amorphous Mg50 Ni50 Alloy Produced By Mechanical Alloying
|
2010 |
14 |
artículo de investigación |
Journal Of Non Crystalline Solids
|
WoS Scopus |
|
Feeding Dry Olive Cake Modifies Subcutaneous Fat Composition In Lambs, Noting Cake Resistance To Degradation And Peroxidation
|
2009 |
17 |
artículo de investigación |
Chilean Journal Of Agricultural Research
|
WoS SciELO Scopus |
|
Effect Of The Milling Time On Thermal Stability Of Mechanically Alloyed Mg50 Ni50 Amorphous Alloy Efecto Del Tiempo De Molienda Sobre La Estabilidad Témica Del Amorfo Mg50 Ni50 Producido Mediante Aleado Mecáico
|
2009 |
1 |
artículo de investigación |
Revista De Metalurgia
|
WoS Scopus |
|
Differentiation Of Sheep Milk And Cheese Based On Quality And Composition
|
2009 |
9 |
revisión |
Ciencia E Investigación Agraria
|
WoS SciELO Scopus |
|
Use Of Supplements And Variation In The Stocking Rate In Cow Calf Systems On Temperate Pastures In Chile: A Simulation Approach
|
2009 |
5 |
artículo de investigación |
Animal Production Science
|
WoS Scopus |
|
X Ray Profile Analysis Of Cu 8wt.%Cr Processed By Mechanical Alloying
|
2009 |
2 |
artículo de investigación |
Revista Materia
|
WoS Scopus |
|
Modelling Supplementation Strategies For Beef Steer Rearing And Fattening Systems In Southern Chile
|
2009 |
6 |
artículo de investigación |
Chilean Journal Of Agricultural Research
|
WoS SciELO Scopus |
|
Indications Of The Formation Of An Oversaturated Solid Solution During Hydrogenation Of Mg Ni Based Nanocomposite Produced By Mechanical Alloying
|
2009 |
14 |
artículo de investigación |
International Journal Of Hydrogen Energy
|
WoS Scopus |
|
Arsenic Removal By Using Colloidal Adsorption Flotation Utilizing Fe(oh) 3 Floc In A Dissolved Air Flotation System Eliminación De Arsénico Mediante Flotación Por Adsorción Coloidal Utlizando Flóculos De Fe(oh) 3 En Un Sistema De Flotación Por Aire Disuelto
|
2009 |
1 |
artículo de investigación |
Revista De Metalurgia
|
WoS Scopus |
|
Thermodynamic Analysis Of The Change Of Solid Solubility In A Binary System Processed By Mechanical Alloying
|
2009 |
24 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
X Ray Diffraction Line Profile Analysis Of Cu 2 Wt. % Cr 6 Wt. % Mo Alloy Mechanically Alloyed
|
2008 |
2 |
artículo de investigación |
Revista De Metalurgia
|
WoS Scopus |
|
Effects Of Mo Concentration On The Structural And Corrosion Properties Of Cu Alloy
|
2019 |
5 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Semi Empirical Computational Thermodynamic Calculations Used To Predict Carbide Dissociation In Fe Matrix
|
2020 |
12 |
artículo de investigación |
Materials Chemistry And Physics
|
WoS Scopus |
|
Thermodynamic Analysis Of The Formation Of Fcc And Bcc Solid Solutions Of Ti Based Ternary Alloys By Mechanical Alloying
|
2020 |
8 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Two Fibers Used In The Colombian Amazonia And Their Use As Potential Reinforcement For Composite Materials
|
2019 |
0 |
proceedings paper |
Minerals, Metals And Materials Series
|
WoS Scopus |
|
Effect Of Porosity On Mechanical And Electrochemical Properties Of Ti 6 Al 4 V Alloy
|
2020 |
31 |
artículo de investigación |
Electrochimica Acta
|
WoS Scopus |
|
Effect Of Added Porosity On A Novel Porous Ti Nb Ta Fe Mn Alloy Exposed To Simulated Body Fluid
|
2020 |
19 |
artículo de investigación |
Materials Science And Engineering C
|
WoS Scopus |
|
Waste Tire Rubber Powders Based Composite Materials
|
2019 |
4 |
proceedings paper |
Minerals, Metals And Materials Series
|
WoS Scopus |
|
The Effect Of Alumina Particles On The Microstructural And Mechanical Properties Of Copper Foams Fabricated By Space Holder Method
|
2018 |
5 |
artículo de investigación |
Materials Research Express
|
WoS Scopus |
|
Beef Production Systems In Southern Chile. Typology And Evolution Between 1997 And 2007 Sistemas De Producción De Carne Bovina En El Sur De Chile: Tipología Y Evolución Entre 1997 Y 2007
|
2018 |
0 |
artículo de investigación |
Archivos De Zootecnia
|
Scopus WoS |
|
Mg2 Nni0.5 Co0.5compound Obtaining By Mechanical Alloying And Their Performance On Hydriding Process Obtención Del Compuesto Mg2 Ni0.5 Co0.5mediante Aleado Mecánico Y Estudio De Su Comportamiento Frente Al Proceso De Hidruración
|
2017 |
0 |
artículo de investigación |
Dyna (Colombia)
|
Scopus WoS |
|
Mechanical Properties Of Copper Foams Reinforced With Alumina Particles
|
2014 |
0 |
|
Mechanical Properties Of Copper Foams Reinforced With Alumina Particles
|
Scopus |
|
Relationship Between The Chemical Composition And Atomic Volume In Ag X % At Zn (X ≤ 20) Solid Solutions Relación Entre La Composición Química Y El Volumen Atómico En Soluciones Sólidas Ag X % At Zn (X ≤ 20)
|
2014 |
0 |
artículo de investigación |
Dyna (Colombia)
|
Scopus WoS |
|
X Ray Diffraction Peak Analysis Of Two Metallic Materials Analisis De Perfiles De Diffracción De Rayos X De Dos Materiales Metalicos
|
2013 |
0 |
|
Revista Latinoamericana De Metalurgia Y Materiales
|
Scopus WoS |
|
Sulphuric Acid Leaching Of Mechanically Activated Chalcopyrite Lixiviación De Calcopirita Mecánicamente Activada Utilizando ácido Sulfúrico
|
2010 |
0 |
artículo de investigación |
Revista Facultad De Ingenieria
|
Scopus WoS |
|
X Ray Diffraction Line Profile Analysis Of Cu 2 Wt. % Cr 6 Wt. % Mo Alloy Mechanically Alloyed Análisis De Perfiles De Difracción De Una Aleación Cu 2 % En Peso Cr 6 % En Peso Mo, Aleada Mecánicamente
|
2008 |
0 |
artículo de investigación |
Revista De Metalurgia
|
Scopus WoS |
|
Fractal And Conventional Analysis Of Cu Content Effect On The Microstructure Of Al Si Cu Mg Alloys
|
2020 |
6 |
artículo de investigación |
Materials Research
|
WoS Scopus |
|
Tribological Performance Of Porous Ti Nb Ta Fe Mn Alloy In Dry Condition
|
2020 |
5 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Analysis Of Microstructural Parameters And Quantification Of Phases In A Plasma Nitrided Aisi 4140 Steel
|
2020 |
2 |
artículo de investigación |
Philosophical Magazine Letters
|
WoS Scopus |
|
Study Of X Ray Diffraction Profiles Of A Ti 13 Ta 3 Sn Alloy Obtained By Mechanical Alloying
|
2020 |
0 |
artículo de investigación |
Revista Materia
|
WoS Scopus |
|
Latin American Food Labelling: Review And Recent Developments
|
2020 |
0 |
revisión |
Food Chemistry, Function And Analysis
|
WoS Scopus |
|
Effect Of Ni Addition And Cryogenic Hardening On The Mechanical And Tribological Properties Of Self Lubricating Steels Produced By Mim
|
2020 |
2 |
artículo de investigación |
Powder Metallurgy
|
WoS Scopus |
|
Effect Of Hot Pressing And Hot Isostatic Pressing On The Microstructure, Hardness, And Wear Behavior Of Nickel
|
2020 |
8 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Production Of Aluminum Foams With Hierarchical Porosity By A Combination Of Two Different Manufacturing Methods
|
2020 |
10 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Influence Of The Synthesis Technique On Tribological Behavior Of A Ti 6 Al 4 V Alloy
|
2020 |
5 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Effect Of Sn On Synthesis Of Nanocrystalline Ti Based Alloy With Fcc Structure
|
2020 |
12 |
artículo de investigación |
Transactions Of Nonferrous Metals Society Of China (English Edition)
|
WoS Scopus |
|
The Effect Of <I>Staphylococcus Aureus</I> On The Electrochemical Behavior Of Porous Ti 6 Al 4 V Alloy
|
2020 |
17 |
artículo de investigación |
Bioelectrochemistry
|
WoS Scopus |
|
Improving The Mechanical Strength Of Ternary Beta Titanium Alloy (Ti Ta Sn) Foams, Using A Bimodal Microstructure
|
2020 |
19 |
artículo de investigación |
Materials And Design
|
WoS Scopus |
|
Study Of Silicon Carbide Dissociation Into Fe And Fe C Matrixes Produced By Die Pressing And Sintering
|
2020 |
14 |
artículo de investigación |
Materials Chemistry And Physics
|
WoS Scopus |
|
Powder Metallurgy Production Of Ti 2 Wt Pct Si Alloy: Structural, Mechanical, And Electrochemical Characterization Of The Sintered Material
|
2020 |
2 |
artículo de investigación |
Metallurgical And Materials Transactions A: Physical Metallurgy And Materials Science
|
WoS Scopus |
|
Electrochemical Study Of Metallic Foams Ti Ta Sn Through Sem
|
2020 |
0 |
|
Microscopy And Microanalysis
|
Scopus WoS |
|
Study Of The Effect Of The Floating Die Compaction On Mechanical Properties Of Titanium Foams
|
2020 |
5 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Microstructure, Electrical And Mechanical Properties Of Ti<Sub>2</Sub>Al N Max Phase Reinforced Copper Matrix Composites Processed By Hot Pressing
|
2021 |
39 |
artículo de investigación |
Materials Characterization
|
WoS Scopus |
|
A Study On The Phase Formation And Magnetic Properties Of Fe Ni Co Cu M (M = Mo, Nb) High Entropy Alloys Processed Through Powder Metallurgy
|
2021 |
11 |
artículo de investigación |
Metallurgical And Materials Transactions A: Physical Metallurgy And Materials Science
|
WoS Scopus |
|
Materials Analysis Applying Thermodynamic (Maat) Software: A Friendly And Free Tool To Analyze The Formation Of Solid Solutions, Amorphous Phases And Intermetallic Compounds
|
2021 |
12 |
artículo de investigación |
Computer Physics Communications
|
WoS Scopus |
|
Evolution Of Synthesis Of Fcc Nanocrystalline Solid Solution And Amorphous Phase In The Ti Ta Based Alloy By High Milling Energy
|
2021 |
13 |
artículo de investigación |
Journal Of Alloys And Compounds
|
WoS Scopus |
|
Mechanochemical Processing Of Ir O<Sub>2</Sub> Ta<Sub>2</Sub>O<Sub>5</Sub>: An Alternative Route For Synthesizing Ir And Ir(ta)o<Sub>2</Sub> Solid Solution
|
2021 |
2 |
artículo de investigación |
Boletin De La Sociedad Espanola De Ceramica Y Vidrio
|
WoS Scopus |
|
Evolution Of Face Centered Cubic Ti Alloys Transformation By X Ray Diffraction Profile Analysis In Mechanical Alloying
|
2021 |
3 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Biodepression Of Copper Activated Pyrite With Acidithiobacillus Ferrooxidans In Flotation With Fresh And Seawater
|
2021 |
4 |
artículo de investigación |
Minerals
|
WoS Scopus |
|
Use Of The Fractal Dimension For Porosity Modification In Aluminum Foams Manufactured Using Space Holder Particles
|
2021 |
3 |
artículo de investigación |
Theoretical And Applied Mechanics
|
WoS Scopus |
|
A Tribological And Ion Released Research Of Ti Materials For Medical Devices
|
2022 |
14 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Composite Materials Made Of Waste Tires And Polyurethane Resin: A Case Study Of Flexible Tiles Successfully Applied In Industry
|
2021 |
20 |
artículo de investigación |
Case Studies In Construction Materials
|
WoS Scopus |
|
Sustainability And Circular Economy Perspectives Of Materials For Thermoelectric Modules
|
2022 |
19 |
revisión |
Sustainability (Switzerland)
|
WoS Scopus |
|
Particularities Of The Formation And Modification Of Si And Mg<Sub>2</Sub>Si As Second Phases In Casting Al Alloys: Use Of Shape Descriptors And Fractal Dimension
|
2022 |
4 |
revisión |
Transactions Of The Indian Institute Of Metals
|
WoS Scopus |
|
Heaps: A User Friendly Tool For The Design And Exploration Of High Entropy Alloys Based On Semi Empirical Parameters
|
2022 |
53 |
artículo de investigación |
Computer Physics Communications
|
WoS Scopus |
|
Organic Template Free Synthesis Of Mesoporous Zn O Microparticles By Sol Gel Method And Low Temperature Hydrothermal Treatment
|
2022 |
0 |
artículo de investigación |
Journal Of Nanomaterials
|
WoS Scopus |
|
Synthesis Of Nanostructured Carbon Derived From The Solid State Reaction Between Iron And Boron Carbide
|
2022 |
14 |
artículo de investigación |
Materials Chemistry And Physics
|
WoS Scopus |
|
An Overview Of The Interactions Between Reinforcements And Al Matrices With Si, Cu And Mg As Alloying Elements In Aluminum Matrix Composites: Case Of Oxide Reinforcements
|
2022 |
7 |
artículo de investigación |
Materials Research
|
WoS Scopus |
|
An Overview Of Highly Porous Titanium Processed Via Metal Injection Molding In Combination With The Space Holder Method
|
2022 |
13 |
revisión |
Metals
|
WoS Scopus |
|
In Situ Monitoring Of Dislocation Proliferation During Plastic Deformation Of 304 L Steel Using Ultrasound
|
2022 |
4 |
artículo de investigación |
Materials Science And Engineering: A
|
WoS Scopus |
|
Influence Of Plasma Nitriding Treatment On The Micro Scale Abrasive Wear Behavior Of Aisi 4140 Steel
|
2022 |
16 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
An Overview On The Identification And Characterization Of Cu Rich Second Phases In Casting Al Alloys
|
2022 |
6 |
artículo de investigación |
International #Journal Of Metalcasting
|
WoS Scopus |
|
Thermoelectric Generator Using Low Cost Thermoelectric Modules For Low Temperature Waste Heat Recovery
|
2023 |
4 |
artículo de investigación |
Sustainability (Switzerland)
|
WoS Scopus |
|
Nonlinear Acoustic Characterization Of Heterogeneous Plasticity In Bent Aluminium Samples
|
2023 |
2 |
artículo de investigación |
Materials Science And Engineering: A
|
WoS Scopus |
|
Analysis Of The Interactions Between Nonoxide Reinforcements And Al Si Cu Mg Matrices
|
2022 |
2 |
revisión |
Reviews On Advanced Materials Science
|
WoS Scopus |
|
Effect Of Sn Content On The Passivity Of Ti Ta Sn Alloys
|
2023 |
9 |
artículo de investigación |
Corrosion Science
|
WoS Scopus |
|
Phase Transformations And Porosity Formation For Cu Sn Alloys Over Solution Heat Treated
|
2023 |
6 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Healthy And Sustainable Diets
|
2022 |
0 |
material editorial |
|
WoS |
|
Design Of In Situ Metal Matrix Composites Produced By Powder Metallurgy A Critical Review
|
2022 |
19 |
revisión |
Metals
|
WoS Scopus |
|
Association Between Markers Of Adiposity During Childhood And Puberty Onset In A Cohort Of Latino Girls
|
2023 |
0 |
resumen de reunión |
Hormone Research In Paediatrics
|
WoS Scopus |
|
Fabrication And Arc Erosion Behavior Of Ag Sn O<Sub>2</Sub> Zn O Electrical Contact Materials
|
2023 |
18 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Improving Mechanical Properties And Antibacterial Response Of A/B Ternary Ti Ta Alloy Foams For Biomedical Uses
|
2023 |
10 |
artículo de investigación |
Journal Of Materials Research And Technology
|
WoS Scopus |
|
Computational Study Of The Influence Of α/β Phase Ratio And Porosity On The Elastic Modulus Of Ti Based Alloy Foams
|
2023 |
1 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Computational Analysis Of The Graded Porosity Distribution On The Elastic Modulus Of Ti Foams
|
2023 |
4 |
artículo de investigación |
Materials Today Communications
|
WoS Scopus |
|
Microscopy And Microanalysis Of Electrochemical Assay Of Titanium Metallic Foam
|
2023 |
0 |
|
Microscopy And Microanalysis
|
Scopus WoS |
|
Sem And Eds Analysis Of Ti 13 Ta 1 Cu Alloy Obtained By Mechanical Alloying
|
2023 |
0 |
|
Microscopy And Microanalysis
|
Scopus WoS |
|
Hot Deformation Of Ultrafine Grained Ti C Reinforced Al Cr Fe Nb Mo Ti V Refractory High Entropy Alloys
|
2023 |
0 |
|
Materials Research Proceedings
|
Scopus |
|
High Entropy Alloys: A Review Of Their Performance As Promising Materials For Hydrogen And Molten Salt Storage
|
2023 |
2 |
revisión |
Reviews On Advanced Materials Science
|
WoS Scopus |
|
Simulation Of The Influence Of The Radial Graded Porosity Distribution On Elastic Modulus Of γ/β Phase Ti Based Alloy Foams For Bone Implant
|
2023 |
0 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Study Of Nitrogen Effect On The Mechanical Alloying Process And Subsequent Heat Treatment Of Fe 14 Wt.% Mn Powders
|
2023 |
0 |
artículo de investigación |
Metallurgia Italiana
|
WoS Scopus |
|
Highly Porous Cp Ti Foams Manufactured With Powder Compaction, The Space Holder Method And Plasma Assisted Sintering For Biomedical Applications
|
2024 |
2 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Corrosion Properties Of Ti Nb Sn Alloys Prepared By Mechanical Alloying
|
2025 |
2 |
artículo de investigación |
Journal Of Materials Engineering And Performance
|
WoS Scopus |
|
A Review On Mechanical Alloying And Spark Plasma Sintering Of Refractory High Entropy Alloys: Challenges, Microstructures, And Mechanical Behavior
|
2024 |
41 |
revisión |
Journal Of Materials Research And Technology
|
WoS Scopus |
|
Microstructure And Constitutive Modeling Of An Ultrafine Grained Refractory High Entropy Alloy Fabricated By Powder Metallurgy
|
2024 |
4 |
artículo de investigación |
Journal Of Materials Research And Technology
|
WoS Scopus |
|
Acoustic Assessment Of Microstructural Deformation Mechanisms On A Cold Rolled Cu30 Zn Brass
|
2024 |
1 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Effect Of Max Phase Ti2 Sn C Content On Microstructure, Mechanical Properties, And Friction Behavior Of Iron Based Self Lubricating Composites
|
2024 |
5 |
artículo de investigación |
Materials Letters
|
WoS Scopus |
|
Enhanced Fracture Toughness Of Wc Co Cr Thermally Sprayed Coatings By The Addition Of Ni Cr Fe Si Bc And Mo And Its Influence On Sliding Wear Behavior
|
2024 |
0 |
artículo de investigación |
Coatings
|
WoS Scopus |
|
Sag’s Overload Forecasting Using A Cnn Physical Informed Approach
|
2024 |
4 |
artículo de investigación |
Applied Sciences Basel
|
WoS Scopus |
|
Synthesis And Characterization Of Ti 13 Ta 6 Sn Foams Produced Using Mechanical Alloying, The Space Holder Method And Plasma Assisted Sintering
|
2024 |
1 |
artículo de investigación |
Metals
|
WoS Scopus |
|
High Entropy Alloys As An Alternative Binder To Improve Mechanical, Tribological, And Oxidation Properties Of Cermets
|
2024 |
11 |
artículo de investigación |
Materials And Design
|
WoS Scopus |
|
Kinetic Study Of Oxidation Of Ag Sn Zn Solid Solution Powders Via Hot Mechanochemical Processing
|
2024 |
1 |
artículo de investigación |
Materials
|
WoS Scopus |
|
Energy Transfer By Mechanical Alloying And Electrocatalytic Performance Of The As Sintered Self Supported High Entropy Alloy Fe Ni Co Cu Mo
|
2025 |
4 |
artículo de investigación |
Advanced Engineering Materials
|
WoS Scopus |
|
Effect Of Nb And Si Content On Phase Stability, Microstructure And Mechanical Properties Of Sintered Ti–Nb–Si Alloys
|
2025 |
1 |
artículo de investigación |
Metals
|
WoS Scopus |
|
Effect Of Chromium On Sliding Wear Behavior And Strain Hardening Behavior Of Fe22 Mn0.6 C X Cr Twip Steel
|
2025 |
1 |
artículo de investigación |
Journal Of Materials Research And Technology
|
WoS Scopus |
|
Numerical Modeling Of Gas And Wc Co Cr Particles In The Hvof Process Using Dj2700 Gun And Hydrogen As A Fuel
|
2025 |
0 |
artículo de investigación |
Journal Of Thermal Spray Technology
|
WoS Scopus |
|
Wear, Mechanical Properties And Corrosion Resistance Of Mechanically Alloyed Ti 13 Ta 6 Sn
|
2025 |
0 |
|
Funtai Oyobi Fummatsu Yakin/Journal Of The Japan Society Of Powder And Powder Metallurgy
|
Scopus WoS |
|
A Theoretical Framework For Design And Validation Of In Situ Composite Manufacturing Techniques
|
2025 |
0 |
|
Funtai Oyobi Fummatsu Yakin/Journal Of The Japan Society Of Powder And Powder Metallurgy
|
Scopus WoS |
|
The Influence Of Solid Lubricant Reservoir's Morpho Dimensional Evolution On The Sliding Wear Of Sintered Iron Based Self Lubricant Composites
|
2025 |
1 |
artículo de investigación |
Wear
|
WoS Scopus |
|
Enhanced Adhesion And Dual Antibacterial/Anti Adherent Function Of Polycaprolactone Coatings On Polydopamine Treated Ti 13 Ta 12 Sn Alloy
|
2025 |
0 |
artículo de investigación |
Progress In Organic Coatings
|
WoS Scopus |
|
Efflorescences Associated With Acid Saline Drainage From A Dump Of Copper Leached Ores
|
2025 |
0 |
artículo de investigación |
Minerals Engineering
|
WoS Scopus |
|
X Ray Diffraction Pattern Analysis Of Cr Fe Co Ni High Entropy Alloy Deposited Via Cold Spray
|
2025 |
0 |
artículo de investigación |
Powder Diffraction
|
WoS Scopus |
|
Magnesium Based Bulk Metallic Glasses And Their Composites
|
2025 |
0 |
|
Magnesium Based Bulk Metallic Glasses And Their Composites
|
Scopus |
